Posts Tagged: 3D Printing

Raspberry Pi Case

My cousin needed a Case for a Raspberry Pi Case, so I printed him this one: http://www.thingiverse.com/thing:30572 Glow in the dark ABS was used, it works out fairly well.

Raspberry Pi Case

My cousin needed a Case for a Raspberry Pi Case, so I printed him this one: http://www.thingiverse.com/thing:30572 Glow in the dark ABS was used, it works out fairly well.

3d Printed Puch E50 Water Cooled Head

I drew up a Water Cooled Puch E50 head in 123d Design. I printed it out with a 3d printer with low infill. This will allow it to be flask casted with aluminum. The holes were slightly smaller so that

3d Printed Puch E50 Water Cooled Head

I drew up a Water Cooled Puch E50 head in 123d Design. I printed it out with a 3d printer with low infill. This will allow it to be flask casted with aluminum. The holes were slightly smaller so that

Baby Brass Knuckles – Proof of concept for taking a drawing and turning it 3d.

Here is a proof of concept that I have been working on being able to take a drawing or object and being able to take pictures of it, trace it, and then extrude it to being a 3D printed object.

Baby Brass Knuckles – Proof of concept for taking a drawing and turning it 3d.

Here is a proof of concept that I have been working on being able to take a drawing or object and being able to take pictures of it, trace it, and then extrude it to being a 3D printed object.

3D Printed Rocket and Test Flight

I decided to print this Modular Rocket by Landru from thingiverse: http://www.thingiverse.com/thing:8754 It uses ‘D’ Estes motors. The fit on them was pretty tight printed. I could have sanded it out a bit to work better. I printed out a base,

3D Printed Rocket and Test Flight

I decided to print this Modular Rocket by Landru from thingiverse: http://www.thingiverse.com/thing:8754 It uses ‘D’ Estes motors. The fit on them was pretty tight printed. I could have sanded it out a bit to work better. I printed out a base,