Posts Tagged: 3D Print
3d Printed Punch and Die Set for 2mm and 4mm spheres
Originally posted on cornucopiamachine:
3d Printed punch and die set for 2mm and 4mm spheres for compressible powder. Designed by me. The punches and dies slide inside a hole that was drilled just slightly oversize in a 2″ steel rod.…
3d Printed Punch and Die Set for 2mm and 4mm spheres
Originally posted on cornucopiamachine:
3d Printed punch and die set for 2mm and 4mm spheres for compressible powder. Designed by me. The punches and dies slide inside a hole that was drilled just slightly oversize in a 2″ steel rod.…
Raspberry Pi Case
My cousin needed a Case for a Raspberry Pi Case, so I printed him this one: http://www.thingiverse.com/thing:30572 Glow in the dark ABS was used, it works out fairly well.
Raspberry Pi Case
My cousin needed a Case for a Raspberry Pi Case, so I printed him this one: http://www.thingiverse.com/thing:30572 Glow in the dark ABS was used, it works out fairly well.
3d Owl Print
My first 3d Print. It was another one on Thingiverse, Owl statue by cushwa: http://www.thingiverse.com/thing:18218 It kind of looks like a creepy owl statue that is around my Apt named Owlfred the Owl.
3d Owl Print
My first 3d Print. It was another one on Thingiverse, Owl statue by cushwa: http://www.thingiverse.com/thing:18218 It kind of looks like a creepy owl statue that is around my Apt named Owlfred the Owl.
3d Printed Gnome
This was one of my earlier prints when I first got the Solidoodle. It was another one on thingiverse: http://www.thingiverse.com/thing:22270 Mostly I was playing around with settings in Skeinforge.
3d Printed Gnome
This was one of my earlier prints when I first got the Solidoodle. It was another one on thingiverse: http://www.thingiverse.com/thing:22270 Mostly I was playing around with settings in Skeinforge.
Aluminum Octopus
Here is another 3d print from thingiverse: http://www.thingiverse.com/thing:27053 It is titled Makerbot Cute Octopus Says Hello by Jason I decided to try out casting 3d Printed objects, so one morning I made a bunch of objects and scaled them down
Aluminum Octopus
Here is another 3d print from thingiverse: http://www.thingiverse.com/thing:27053 It is titled Makerbot Cute Octopus Says Hello by Jason I decided to try out casting 3d Printed objects, so one morning I made a bunch of objects and scaled them down
Honda Motocompo
Here is another thingiverse project that I tried out when I just got my printer and was excited to start printing: http://www.thingiverse.com/thing:41797 It is a 1/10th scale Motocompo Folding Scooter by petropixel. It was a folding scooter back in the 1980s that
Honda Motocompo
Here is another thingiverse project that I tried out when I just got my printer and was excited to start printing: http://www.thingiverse.com/thing:41797 It is a 1/10th scale Motocompo Folding Scooter by petropixel. It was a folding scooter back in the 1980s that
Beecher’s Stamp
Here is a custom stamp I did for Beecher’s Magazine at the University of Kansas. This was created from a jpeg file. I used Inkscape to do the tracing of the image. I saved this file as a dxf autocad
Beecher’s Stamp
Here is a custom stamp I did for Beecher’s Magazine at the University of Kansas. This was created from a jpeg file. I used Inkscape to do the tracing of the image. I saved this file as a dxf autocad
5/16” Paper Cutter
I made a custom paper cutter for a student competition where they need uniform strips of paper and they need a lot of them quickly. I designed this in 123D Design using net dimensions for the razor blade so they
5/16” Paper Cutter
I made a custom paper cutter for a student competition where they need uniform strips of paper and they need a lot of them quickly. I designed this in 123D Design using net dimensions for the razor blade so they
MadMatMax 