Posts Tagged: 2 stroke
1978 Rigid Puch Free Spirit
This is a 1978 Rigid Puch Free Spirit that I have been working on for too long. A previous owner had the shocks welded in with what looks like tubes off of a dolly. I cut off the seat post
1978 Rigid Puch Free Spirit
This is a 1978 Rigid Puch Free Spirit that I have been working on for too long. A previous owner had the shocks welded in with what looks like tubes off of a dolly. I cut off the seat post
3d Printed Puch E50 Water Cooled Head
I drew up a Water Cooled Puch E50 head in 123d Design. I printed it out with a 3d printer with low infill. This will allow it to be flask casted with aluminum. The holes were slightly smaller so that
3d Printed Puch E50 Water Cooled Head
I drew up a Water Cooled Puch E50 head in 123d Design. I printed it out with a 3d printer with low infill. This will allow it to be flask casted with aluminum. The holes were slightly smaller so that
2004 Derbi GPR 50
I bought a new project bike. It came from a police auction. It looked like someone tried to remove the motor with a hack saw. I went through and welded all of the cuts in the frame. I plan on
2004 Derbi GPR 50
I bought a new project bike. It came from a police auction. It looked like someone tried to remove the motor with a hack saw. I went through and welded all of the cuts in the frame. I plan on
KTM Foxi GT
This is my roommates KTM Foxi GT. We did a little bit of work to get it to be a reliable daily rider: The fuel lines were all replaced. The carburetor was cleaned out, the electrical system was kind of iffy,
KTM Foxi GT
This is my roommates KTM Foxi GT. We did a little bit of work to get it to be a reliable daily rider: The fuel lines were all replaced. The carburetor was cleaned out, the electrical system was kind of iffy,
Honda MB5
Here is my MB5 right next to my friend’s Hobbit and another MB5. Right now I am running stock as it makes my daily ride much more reliable. I have deleted the oil pump with a block of plate and
MadMatMax 