Category Archives: Vehicles

Rigid Puch Free Spirit

1978 Rigid Puch Free Spirit

This is a 1978 Rigid Puch Free Spirit that I have been working on for too long. A previous owner had the shocks welded in with what looks like tubes off of a dolly. I cut off the seat post

Rigid Puch Free Spirit

1978 Rigid Puch Free Spirit

This is a 1978 Rigid Puch Free Spirit that I have been working on for too long. A previous owner had the shocks welded in with what looks like tubes off of a dolly. I cut off the seat post

Derbi GPR 50

2004 Derbi GPR 50

I bought a new project bike. It came from a police auction. It looked like someone tried to remove the motor with a hack saw. I went through and welded all of the cuts in the frame. I plan on

Derbi GPR 50

2004 Derbi GPR 50

I bought a new project bike. It came from a police auction. It looked like someone tried to remove the motor with a hack saw. I went through and welded all of the cuts in the frame. I plan on

Puch E50 Rebuild

Puch E50 Rebuild

Here is a Puch E50 that I rebuilt for a project I am working on. You can find manuals online. There is a great tutorial on how to rebuild them here: http://www.mopedarmy.com/wiki/Rebuild_a_Puch_E50_Engine After looking at that tutorial and downloading a

Puch E50 Rebuild

Puch E50 Rebuild

Here is a Puch E50 that I rebuilt for a project I am working on. You can find manuals online. There is a great tutorial on how to rebuild them here: http://www.mopedarmy.com/wiki/Rebuild_a_Puch_E50_Engine After looking at that tutorial and downloading a

40T Welded Swingarm

Motobecane 40t Frame

Here is a Motobecane 40T Frame. The stock frame is rigid and could be easily bent. I traced out the pieces by making cardboard templates and then transferred them to sheet metal. Then I cut the sheet metal out with a cut

40T Welded Swingarm

Motobecane 40t Frame

Here is a Motobecane 40T Frame. The stock frame is rigid and could be easily bent. I traced out the pieces by making cardboard templates and then transferred them to sheet metal. Then I cut the sheet metal out with a cut

KTM Foxi GT

KTM Foxi GT

This is my roommates KTM Foxi GT. We did a little bit of work to get it to be a reliable daily rider: The fuel lines were all replaced. The carburetor was cleaned out, the electrical system was kind of iffy,

KTM Foxi GT

KTM Foxi GT

This is my roommates KTM Foxi GT. We did a little bit of work to get it to be a reliable daily rider: The fuel lines were all replaced. The carburetor was cleaned out, the electrical system was kind of iffy,

Honda CT90

Honda Trail CT90

This is my friend Alex’s Honda CT90. I helped him pick it up in my truck and have helped him out with some of the work along the way. The tank was pretty rusty when he purchased it. He ended

Honda CT90

Honda Trail CT90

This is my friend Alex’s Honda CT90. I helped him pick it up in my truck and have helped him out with some of the work along the way. The tank was pretty rusty when he purchased it. He ended

mb5

Honda MB5

Here is my MB5 right next to my friend’s Hobbit and another MB5. Right now I am running stock as it makes my daily ride much more reliable. I have deleted the oil pump with a block of plate and

mb5

Honda MB5

Here is my MB5 right next to my friend’s Hobbit and another MB5. Right now I am running stock as it makes my daily ride much more reliable. I have deleted the oil pump with a block of plate and