Category Archives: 3d Printing
3d Printed Punch and Die Set for 2mm and 4mm spheres
Originally posted on cornucopiamachine:
3d Printed punch and die set for 2mm and 4mm spheres for compressible powder. Designed by me. The punches and dies slide inside a hole that was drilled just slightly oversize in a 2″ steel rod.…
3d Printed Punch and Die Set for 2mm and 4mm spheres
Originally posted on cornucopiamachine:
3d Printed punch and die set for 2mm and 4mm spheres for compressible powder. Designed by me. The punches and dies slide inside a hole that was drilled just slightly oversize in a 2″ steel rod.…
123D Catch of MB5 Fairing
I used 123d Catch to capture this fairing. I need to go back through and take pictures with soft even lighting so I don’t have to edit the 3d model as much.
123D Catch of MB5 Fairing
I used 123d Catch to capture this fairing. I need to go back through and take pictures with soft even lighting so I don’t have to edit the 3d model as much.
Raspberry Pi Case
My cousin needed a Case for a Raspberry Pi Case, so I printed him this one: http://www.thingiverse.com/thing:30572 Glow in the dark ABS was used, it works out fairly well.
Raspberry Pi Case
My cousin needed a Case for a Raspberry Pi Case, so I printed him this one: http://www.thingiverse.com/thing:30572 Glow in the dark ABS was used, it works out fairly well.
3d Printed Puch E50 Water Cooled Head
I drew up a Water Cooled Puch E50 head in 123d Design. I printed it out with a 3d printer with low infill. This will allow it to be flask casted with aluminum. The holes were slightly smaller so that
3d Printed Puch E50 Water Cooled Head
I drew up a Water Cooled Puch E50 head in 123d Design. I printed it out with a 3d printer with low infill. This will allow it to be flask casted with aluminum. The holes were slightly smaller so that
3d Owl Print
My first 3d Print. It was another one on Thingiverse, Owl statue by cushwa: http://www.thingiverse.com/thing:18218 It kind of looks like a creepy owl statue that is around my Apt named Owlfred the Owl.
3d Owl Print
My first 3d Print. It was another one on Thingiverse, Owl statue by cushwa: http://www.thingiverse.com/thing:18218 It kind of looks like a creepy owl statue that is around my Apt named Owlfred the Owl.
3d Printed Gnome
This was one of my earlier prints when I first got the Solidoodle. It was another one on thingiverse: http://www.thingiverse.com/thing:22270 Mostly I was playing around with settings in Skeinforge.
3d Printed Gnome
This was one of my earlier prints when I first got the Solidoodle. It was another one on thingiverse: http://www.thingiverse.com/thing:22270 Mostly I was playing around with settings in Skeinforge.
Baby Brass Knuckles – Proof of concept for taking a drawing and turning it 3d.
Here is a proof of concept that I have been working on being able to take a drawing or object and being able to take pictures of it, trace it, and then extrude it to being a 3D printed object.
Baby Brass Knuckles – Proof of concept for taking a drawing and turning it 3d.
Here is a proof of concept that I have been working on being able to take a drawing or object and being able to take pictures of it, trace it, and then extrude it to being a 3D printed object.
Aluminum Octopus
Here is another 3d print from thingiverse: http://www.thingiverse.com/thing:27053 It is titled Makerbot Cute Octopus Says Hello by Jason I decided to try out casting 3d Printed objects, so one morning I made a bunch of objects and scaled them down
Aluminum Octopus
Here is another 3d print from thingiverse: http://www.thingiverse.com/thing:27053 It is titled Makerbot Cute Octopus Says Hello by Jason I decided to try out casting 3d Printed objects, so one morning I made a bunch of objects and scaled them down
Honda Motocompo
Here is another thingiverse project that I tried out when I just got my printer and was excited to start printing: http://www.thingiverse.com/thing:41797 It is a 1/10th scale Motocompo Folding Scooter by petropixel. It was a folding scooter back in the 1980s that
Honda Motocompo
Here is another thingiverse project that I tried out when I just got my printer and was excited to start printing: http://www.thingiverse.com/thing:41797 It is a 1/10th scale Motocompo Folding Scooter by petropixel. It was a folding scooter back in the 1980s that
Beecher’s Stamp
Here is a custom stamp I did for Beecher’s Magazine at the University of Kansas. This was created from a jpeg file. I used Inkscape to do the tracing of the image. I saved this file as a dxf autocad
Beecher’s Stamp
Here is a custom stamp I did for Beecher’s Magazine at the University of Kansas. This was created from a jpeg file. I used Inkscape to do the tracing of the image. I saved this file as a dxf autocad
MadMatMax 